ACCESSING THE DATA
INDEXES
Columns used in the WHERE clause should be indexed. The impact of indexes used on the columns in the master queries of a report will be minor as these queries will only access the database once. However, for a significant performance improvement indexes should be used on any linked columns in the detail query.
A lack of appropriate indexes can result in many full-table scans which can have a major impact on performance.
CALCULATIONS
When performing calculations within a report (either through summary or formula columns), the general rule of thumb is the more calculations that can be performed within the SQL of the report queries, the better. If the calculations are included in the SQL, then they are performed before the data is retrieved by the database, rather than the performed on the retrieved data by the Report. Database-stored user-defined PL/SQL functions can also be included in the query select list. This is more efficient then using a local PL/SQL function (e.g. in a formula column), since the calculated data is returned as part of the result set from the database.
TO LINK OR NOT TO LINK
As with most operations in Reports, there are a number of ways to create data models that include more than one table. Consider, for example, the standard case of the dept/emp join, i.e., the requirement is to create a report that lists all the employees in each department in the company. In Reports the user can either use the following in a single query:
Select d.dname, e.ename From emp e, dept d Where e.deptno(+) = d.deptno
Or they can create two queries
Select deptno, dname from dept Select deptno, ename from emp
and create a column link between the two on deptno.
When designing the data model in the report, it is preferable to minimize the actual number of queries by using fewer, larger (multi-table) queries, rather than several simpler (single-table) queries. Each time a query is issued, Oracle Reports needs to parse, bind and execute a cursor. A single query report is therefore able to return all the required data in a single cursor rather than many. Also be aware that with master-detail queries, the detail query will be re-parsed, re-bound and re-executed for each master record retrieved. In this instance it is often more efficient to merge the two queries and use break groups to create the master-detail effect.
It should be noted, however, that the larger and more complex a query gets, the more difficult it can be to maintain. Each site needs to decide at what point to balance the performance versus the maintenance requirements.
LAYOUT
When generating a default layout Oracle Reports puts a frame around virtually every object, so that it is protected from being overwritten when the report is run.
At runtime, every layout object (frames, fields, boilerplate, etc.) is examined to determine the likelihood of that object being overwritten. In some situations (for example boilerplate text column headings), there is clearly no risk of the objects being overwritten and hence the immediately surrounding frame can be removed.
This reduces the number of objects that Oracle Reports has to format and hence improves performance.
Similarly, when an object is defined as having an undefined size (variable, expanding or contracting in either or both the horizontal and vertical directions) then extra processing is required since Oracle
Reports must determine that instance of the object's size before formatting that object and those around it. If this sizing can be set to fixed then this additional processing is not required, since the size and positional relationships between the objects is already known.
Furthermore, instead of truncating a character string from a field in the Report Builder Layout, it is better to use the SUBSTR function in the report query to truncate the data at the database level This reduces unnecessary processing and formatting after the data retrieval.
FORMAT TRIGGERS
Format triggers have two major purposes:
• Dynamically disable and enable objects at runtime.
• Dynamically change the appearance of an object at runtime.
Care should always be exercised when using format triggers, since the triggers do not only fire for every instance of their associated object produced, but every time the object is formatted at runtime.
These two scenarios may sound the same, but consider the following situation:
A tabular report includes a single repeating frame that can expand vertically and has page protect set on. As this report is formatted, there is room for one more line at the bottom of the first page.
Reports starts to format the next instance of the repeating frame and fires its associated format trigger. One of the objects inside the repeating frame is found to have expanded and this instance of the repeating frame is therefore moved to the following page and the format trigger for the repeating frame is fired again. Hence, although the repeating frame only appears once (at the top of the second page), the format trigger has fired twice.
Because you can not be sure how many times a format trigger will fire for a particular object, DML should not be performed in a format trigger. With the example above, had the format trigger contained an INSERT statement then two rows of data would have been inserted.
GENERAL LAYOUT GUIDELINES
The following guidelines can improve performance when creating or changing a report layout:
• Make your non-graphical layout objects (e.g. boilerplate text or fields with text) fixed in size -- that is, set the Vertical and Horizontal Elasticity property of the field to Fixed. In particular, making repeating frames and their contents fixed in size can improve performance. Non- graphical objects that are variable in size require more processing because Report Builder must determine their size before formatting them. Non-graphical objects that are fixed in size do not require this additional processing because their size is already known.
• Make your graphical layout objects (e.g., images and Oracle Graphics objects) variable in size -- that is, Vertical and Horizontal Elasticity of Variable. Graphical objects that are fixed in size usually need to have their contents scaled to fit inside of the object. Scaling an object's contents requires more processing. If the object is variable in size, it can grow or shrink with the contents and scaling is not necessary.
• Specify Reduce Image Resolution for image objects whose size you reduce. (This option is available as a drawing option under the Format menu). When you reduce the size of an image, it requires less information to display it than when it was larger. Reduce Image Resolution eliminates the unnecessary information and reduces the amount of space needed to store the image. This can be particularly useful for large, multi-colored images.
• Make fields that contain text one line long and ensure that their contents fit within their specified width (e.g., by using the SUBSTR function). If a field with text spans more than one line, then Report Builder must use its word-wrapping algorithm to format the field. Ensuring that a field only takes one line to format avoids the additional processing of the word-wrapping algorithm.
• Minimize the use of different formatting attributes (e.g., fonts) within the same field or boilerplate text. If text in a field or boilerplate object contains numerous different formatting attributes, it requires longer to format.
INDEXES
Columns used in the WHERE clause should be indexed. The impact of indexes used on the columns in the master queries of a report will be minor as these queries will only access the database once. However, for a significant performance improvement indexes should be used on any linked columns in the detail query.
A lack of appropriate indexes can result in many full-table scans which can have a major impact on performance.
CALCULATIONS
When performing calculations within a report (either through summary or formula columns), the general rule of thumb is the more calculations that can be performed within the SQL of the report queries, the better. If the calculations are included in the SQL, then they are performed before the data is retrieved by the database, rather than the performed on the retrieved data by the Report. Database-stored user-defined PL/SQL functions can also be included in the query select list. This is more efficient then using a local PL/SQL function (e.g. in a formula column), since the calculated data is returned as part of the result set from the database.
TO LINK OR NOT TO LINK
As with most operations in Reports, there are a number of ways to create data models that include more than one table. Consider, for example, the standard case of the dept/emp join, i.e., the requirement is to create a report that lists all the employees in each department in the company. In Reports the user can either use the following in a single query:
Select d.dname, e.ename From emp e, dept d Where e.deptno(+) = d.deptno
Or they can create two queries
Select deptno, dname from dept Select deptno, ename from emp
and create a column link between the two on deptno.
When designing the data model in the report, it is preferable to minimize the actual number of queries by using fewer, larger (multi-table) queries, rather than several simpler (single-table) queries. Each time a query is issued, Oracle Reports needs to parse, bind and execute a cursor. A single query report is therefore able to return all the required data in a single cursor rather than many. Also be aware that with master-detail queries, the detail query will be re-parsed, re-bound and re-executed for each master record retrieved. In this instance it is often more efficient to merge the two queries and use break groups to create the master-detail effect.
It should be noted, however, that the larger and more complex a query gets, the more difficult it can be to maintain. Each site needs to decide at what point to balance the performance versus the maintenance requirements.
LAYOUT
When generating a default layout Oracle Reports puts a frame around virtually every object, so that it is protected from being overwritten when the report is run.
At runtime, every layout object (frames, fields, boilerplate, etc.) is examined to determine the likelihood of that object being overwritten. In some situations (for example boilerplate text column headings), there is clearly no risk of the objects being overwritten and hence the immediately surrounding frame can be removed.
This reduces the number of objects that Oracle Reports has to format and hence improves performance.
Similarly, when an object is defined as having an undefined size (variable, expanding or contracting in either or both the horizontal and vertical directions) then extra processing is required since Oracle
Reports must determine that instance of the object's size before formatting that object and those around it. If this sizing can be set to fixed then this additional processing is not required, since the size and positional relationships between the objects is already known.
Furthermore, instead of truncating a character string from a field in the Report Builder Layout, it is better to use the SUBSTR function in the report query to truncate the data at the database level This reduces unnecessary processing and formatting after the data retrieval.
FORMAT TRIGGERS
Format triggers have two major purposes:
• Dynamically disable and enable objects at runtime.
• Dynamically change the appearance of an object at runtime.
Care should always be exercised when using format triggers, since the triggers do not only fire for every instance of their associated object produced, but every time the object is formatted at runtime.
These two scenarios may sound the same, but consider the following situation:
A tabular report includes a single repeating frame that can expand vertically and has page protect set on. As this report is formatted, there is room for one more line at the bottom of the first page.
Reports starts to format the next instance of the repeating frame and fires its associated format trigger. One of the objects inside the repeating frame is found to have expanded and this instance of the repeating frame is therefore moved to the following page and the format trigger for the repeating frame is fired again. Hence, although the repeating frame only appears once (at the top of the second page), the format trigger has fired twice.
Because you can not be sure how many times a format trigger will fire for a particular object, DML should not be performed in a format trigger. With the example above, had the format trigger contained an INSERT statement then two rows of data would have been inserted.
GENERAL LAYOUT GUIDELINES
The following guidelines can improve performance when creating or changing a report layout:
• Make your non-graphical layout objects (e.g. boilerplate text or fields with text) fixed in size -- that is, set the Vertical and Horizontal Elasticity property of the field to Fixed. In particular, making repeating frames and their contents fixed in size can improve performance. Non- graphical objects that are variable in size require more processing because Report Builder must determine their size before formatting them. Non-graphical objects that are fixed in size do not require this additional processing because their size is already known.
• Make your graphical layout objects (e.g., images and Oracle Graphics objects) variable in size -- that is, Vertical and Horizontal Elasticity of Variable. Graphical objects that are fixed in size usually need to have their contents scaled to fit inside of the object. Scaling an object's contents requires more processing. If the object is variable in size, it can grow or shrink with the contents and scaling is not necessary.
• Specify Reduce Image Resolution for image objects whose size you reduce. (This option is available as a drawing option under the Format menu). When you reduce the size of an image, it requires less information to display it than when it was larger. Reduce Image Resolution eliminates the unnecessary information and reduces the amount of space needed to store the image. This can be particularly useful for large, multi-colored images.
• Make fields that contain text one line long and ensure that their contents fit within their specified width (e.g., by using the SUBSTR function). If a field with text spans more than one line, then Report Builder must use its word-wrapping algorithm to format the field. Ensuring that a field only takes one line to format avoids the additional processing of the word-wrapping algorithm.
• Minimize the use of different formatting attributes (e.g., fonts) within the same field or boilerplate text. If text in a field or boilerplate object contains numerous different formatting attributes, it requires longer to format.
No comments:
Post a Comment